Abalon logo Request an estimate
 

Sump pump systems

Click on the image to enlarge.
Click to enlarge

Sump pump system

Multiple cracks on the basement floor and the presence of water inside floor clean outs are signs that a sump pump system is required. Abalon can custom design a system that will meet all of you foundation requirements. All of our work is guaranteed.

Click to enlarge

Sump pump systems : Step 1

Sump pump systems can be installed in unfinshed areas such as utility rooms.

Click to enlarge

Sump pump systems : Step 2

Sump pump systems can also be installed in finished areas.

Click to enlarge

Sump pump systems : Step 3

Abalon has designed a 3 foot sump pump pit that takes into account depth, collection volume, durability and functionality. These pits are manufactured exclusively for Abalon. Typical contractor grade pits are 18 to 24 inches deep and impractical.

Click to enlarge

Sump pump systems : Step 4

Concrete is broken to allow for the sump pump pit installation and hauled away.

Click to enlarge

Sump pump systems : Step 5

Soil is dug out and hauled away. The sump pump pit is set flush with the ground.

Click to enlarge

Sump pump systems : Step 6

The sump pump pit is then backfilled with washed rock.

Click to enlarge

Sump pump systems : Step 7

The concrete is poured allowing for plumbing to run up and out to exit.

Click to enlarge

Sump pump systems : Step 8

Discharge line is sent to exterior and runs downhill.

Call us for an estimate today!

403.230.3050 - Calgary

1.877.441.3050
Toll free outside Calgary

Prev 1 2 3 4 5 6 7 8 9 10 Next